The fixed beam anchor is specifically designed for a fall arrest anchorage. It installs in seconds to the beam structure with final tightening using a built-in adjustment handle. It can be attached to the beam in any orientation or direction. Anchor is easily installed by sliding the adjustable hook-end sown to the flange and securing a pin. Meets or exceeds all applicable industry standards including OSHA, and the stringent ANSI Z359. 5,000 lbs. minimum strength in any direction. Weights vary by product size.

12" Anchor Width

• For Beam Flanges 2-1/2" to 12" wide and up to 1-1/2" thick
• Weight @ 5.2 lbs

18" Anchor Width

• For Beam Flanges 2-1/2" to 18" wide and up to 1-1/2" thick
• Weight @ 5.9 lbs

24" Anchor Width

• For Beam Flanges 2-1/2" to 24" wide and up to 1-1/2" thick
• Weight @ 6.4 lbs

36" Anchor Width

• For Beam Flanges 12" to 36" wide and up to 2-1/2" thick
• Weight @ 9.1 lbs